Jensen Swing S104 – Standard 10′ High – 4 Swing – 2 Bay – Residential Swing Set

Bring safe, heavy-duty fun to your backyard with the Jensen Swing S104 – 10′ High, 4-Swing, 2-Bay Residential Frame. Designed for children ages 4–12, this swing set provides endless playtime while meeting ASTM and CPSC guidelines when installed correctly.

The S104 is built to last, with a robust metal frame engineered to withstand harsh residential conditions. Choose your preferred colors for end frame fittings, chains, and swing seats to customize your playset. With proper installation, your swing set can last 2–5 years, depending on environmental conditions.

Ideal for families looking to enhance outdoor spaces, the Jensen Swing S104 ensures safe, durable, and fun swinging experiences for multiple children at once.

Key Features

• Standard heavy-duty steel swing frame, 10′ high
• 4 swings across 2 bays (residential swing seats)
• Designed for in-ground installation set in concrete
• Each bay is designed for two children up to 12 years old, per ASTM and CPSC guidelines
• Jensen does not state weight limits for its frames – actual capacity depends on installation, concrete, soil and use
• Expected lifespan: up to 5 years in optimal conditions / about 2 years in harsh conditions
• Choose your swing seat, chain and frame fitting colors
• Galvanized hardware resists rust; backed by Jensen’s one-year guarantee against defects

Color Options

Select your colors from the options above:

Specifications

Parts Included

• EFF2 End Frame Fittings (2 pcs) – Blue or green
• MFF2 Middle Frame Fitting (1 pc) – Blue or green
• S181 Residential Swing Seats (4 pcs) – Blue, green, red or yellow
• C125 Swing Chains (8 pcs) – Blue, green, red or yellow
• SH114 Swing Hangers (8 pcs)
• H172 Hardware (8 pcs)
• Pipe Legs A – B – 14’ (4 pcs)
• Pipe Middle Legs C – D – 12’6″ (2 pcs)
• H175 Allen Wrench (for shackles) (1 pc)
• Top Rail 10’ (2 pcs)

Frame Footprint

The end frame legs are 331″ apart lengthwise at ground level and 115″ wide at ground level. Below ground, the end frame legs are 347″ lengthwise and 140″ wide. The middle leg is 165″ from the end leg above ground. The two middle legs are 104″ apart above ground and 124″ below ground. Height is 10′.

Tools & Materials Needed

Ladder, ¾″ wrench, ratchet socket wrench, tape measure, H175 Allen wrench (supplied) for shackles, 6mm Allen wrench for set screws, stakes for marking holes, shovel, bricks, gravel, wheelbarrow for mixing concrete, water, concrete, trowel, level, warning signs, and protective surfacing per ASTM F1292 for a 10′ fall height.

Safe Use & Installation Highlights

• Seats are for children ages 4–12 only – not for adults; one child per seat
• Do not allow children to stand or kneel on seats, twist chains or wrap them around the top beam
• Adults should supervise children at all times; do not use if wet or damaged
• Assemble the frame first, then dig holes 2′ deep × 2′ in diameter; set a brick at the bottom of each hole and level the frame before pouring concrete
• Let concrete cure 24 hours and check sturdiness before use
• Never install over concrete, asphalt or other hard surfaces – grass and dirt are not protective surfacing
• Surfacing should extend at least 6′ from the sides and twice the top-bar height in front of and behind the swings
• Post warning signs showing the intended age group, per CPSC guidelines
• Inspect monthly during the play season: set screws, chains, shackles, hanger bearings, rust and surfacing depth

Documents & Downloads

• Installation Guide – Anchor, Assemble & Maintain Your Equipment (PDF)
• Ages for Swing Seats (PDF)
• Certificate of Compliance (PDF)
• ASTM Certification (PDF)
• Outdoor Home Playground Safety Handbook (CPSC) (PDF)
• Proper Maintenance Makes for a Safer Playground (PDF)
• Jensen Third-Party Testing Information (PDF)

About Jensen Swing Products Inc.

Founded in 1946, Jensen Swing Products Inc. is recognized as one of the world’s largest wholesale suppliers of playground equipment, known for a legacy of innovation, safety, and durability. Products are engineered for durability and safety, built to endure years of active use.

Swing frames and hardware exposed to harsh weather are galvanized by electroplating to resist rust, while moving parts are either self-lubricating or designed for easy maintenance. Jensen also offers safety-focused solutions, including special chains for young and handicapped children and reinforced swing seats to deter vandalism.

Every product undergoes thorough field testing to ensure safety and performance. Backed by a one-year guarantee against defects in materials and workmanship, Jensen Swing Products continues to set the benchmark for commercial playground equipment worldwide.